DLAB VC100 Vacuum Controller
Automatic vacuum controller (1–1000 mbar) with 5-inch touchscreen and programmable control (5×5).
The DLAB VC100 vacuum controller is designed for automatic pressure control in vacuum systems. It is recommended for vacuum control on rotary evaporators to automate distillation processes. Two control modes are available: single setpoint control and programmable control. The device can store up to 5 programs, each containing up to 5 steps with configurable pressure and time. A large 5-inch TFT touchscreen makes operation simple. All parts in contact with vapor or liquid are made from PTFE, ceramics and other high-performance materials resistant to corrosion caused by organic solvents, water, acids and alkalis. The built-in vent valve can introduce inert gas into the system. The controller can be connected to a pump power regulator to temporarily switch off the pump after reaching stable vacuum, reducing energy consumption and extending pump lifetime. Compatible with vacuum pumps up to 400 W.
Specifications
| Purpose | Automatic pressure control in vacuum systems |
|---|---|
| Recommended use | Vacuum control on rotary evaporators to automate distillation |
| Vacuum control range | 1–1000 mbar |
| Vacuum holding range | 1–1000 mbar |
| Control modes | Single setpoint / Programmable (5 programs × 5 steps) |
| Programs | Up to 5 programs, each up to 5 steps (pressure & time) |
| Display | 5″ TFT touchscreen |
| Overload sensor | 1500 mbar |
| Hose barbs | Ø 8 mm |
| Wetted materials | PTFE, polypropylene, silicone, ceramics |
| Built-in valve | Inert gas vent/purge to the system equipment |
| Pump compatibility | Vacuum pump power ≤ 400 W |
| Power | 600 W |
| Power supply | 220–240 V, 50/60 Hz |
| Operating environment | 10–40 °C, ≤80% RH |
| Dimensions (L×W×H) | 189×207×193 mm |
| Weight | 4 kg |
Supply and support in Belarus.